Washrooms

● The single tap is suitable for use with cold, hot or mixed water
● The dual tap has 2 inlet connections for cold and hot/mixed water and by pressing the appropriate pedal either can be selected
● Red and blue pads identify the services
● For mixed water the tap should be used in conjuction with a thermostatic mixing valve
● Both the single and dual taps can be converted for floor or wall mounting

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.

The mixcal III group thermostatic mixing valve has been designed especially for centralised systems which demand high flow rates, for example with multiple outlets such as shower and wash basins.

The Altecnic thermostatic regulator for domestic hot water re-circulation systems automatically maintain the specified water temperature.
The thermostatic regulator is intended to be installed in the return pipe of each re-circulation circuit, automatically maintaining the specified water temperature. The regulator controls the flow rate in accordance with the inlet water temperature by means of a dedicated internal thermostatic cartridge. When the water temperature approaches the set value, the obturator progressively closes and reduces the flow passage reducing the amount of water re-circulating.
The water supplied by the re-circulation pump is available to be distributed to other branches in the system, resulting in effective automatic thermal balancing. The regulator is equipped with a thermal disinfection function, which is useful if the water temperature exceeds 55 to 60˚C

● Max operating pressure: 10 bar
● Check valve min. operating pressure: 0.2 bar
● Max operating temperature: 85˚C