SHOCK ARRESTOR WITH TEE AND GAUGE
The assembled 4-way fitting can be used as a shock arrester or expansion vessel under sinks to prevent water hammer and shock to water outlets, washing machines or dish washers.
It can also be installed adjacent to a boiler or unvented cylinder to allow for the expansion of hot water in a small system.
The assembled 4-way fitting can be used as a shock arrester or expansion vessel under sinks to prevent water hammer and shock to water outlets, washing machines or dish washers. It can also be installed adjacent to a boiler or unvented cylinder to allow for the expansion of hot water in a small system.
Design
The Altecnic PVRSK 4-way fitting is designed to allow a pressure gauge and shock arrester or expansion vessel to be easily installed into a copper tube system. The 4-way fitting comes complete with a 0.16 litre shock arrestor and a 0 to 6 bar back connection pressure gauge. The main pipe connections are compression joints to BS EN 1254-2 for use with R250 (half hard) copper tube to BS EN 1057. The side connections are ¼” female to BS EN ISO 228-1.
| Reference | Name | Size | Connections | Max Working Pressure |
|---|---|---|---|---|
| PVRSK | Shock Arrestor with Tee and Gauge | 0.16 L | 15mm Compression | 6 Bar |
SHOCK ARRESTOR WITH TEE AND GAUGE FAQs
There are no product specific FAQs currently available.
Please, view our general FAQs page to find the answer to your question.
Can’t find what you’re looking for?
If you still require further assistance finding the product or service you need, why not get in touch with our dedicated team of experts? Alternatively, you can find your nearest stockist of Altecnic products.
Find a Stockist
Altecnic products are available across the UK, Northern Ireland and Republic of Ireland through all good trade counters. Find a stockist today.Contact Our Team
Our team of experts are always on hand to answer any questions you may have about our products. Contact us today with your query.